Tap any network with the Flex-301 access point.

Using a mini access point it is easy to tap a network. If you happen to have access to a wired connection, you can convert that connection to a wireless connection to use at a later date. Tracking down the connection on large networks can be near impossible as well. Be warned, most companies have policies regarding the installation of wireless routers on company networks.

The Flex-301 is the perfect solution as it has only 1 wired ethernet port, which is all you need to convert a wired lan to a wireless lan. Keep in mind the Flex-301 is not a router, it’s simple a wireless hub, getting an ip-address is up to the services on the network.

Whats nice about the Flex-301 is the size, it’s small enough you can hide it almost anywhere. The device seems to be great for travel as well. Some places may only have wired Internet, but some devices may only have Wi-Fi.

Flex-301 Features
Easy to install and configure
64/128 bit WEP encryption and MAC address filtering to ensure secure network connection
Support HTTP and SNMP configuration
High performance and low cost
Supports two modes : Wireless AP mode or Bridge mode
Data Rate Up to 11 Mbps (auto-scaleback)
Architecture Infrastructure, Bridge
Frequency Band 2.4 ~ 2.4835 GHz
Modulation DSSS (Direct Sequenc Spread Spectrum)
Channel Support US/Canada: 1~11
Europe: 1~14
Japan: 1~13 or 14
China: 1~13
Security 64/128 WEP, IEEE 802.1x
Antenna One 2.4GHz R-SMA detachable
Port One RJ45 (ethernet)
AC Adapter Input : AC100-120V, 47-63Hz, 1.0A max
Output : DC 3.3V / 1.0A
LED Indicator Power, LAN Link/ACT, WLAN TEST
Temperature Operating: 0C-45C
Storage: -20C-70C
Humidity 5% ~ 95% (non condensing)
Approvals CE, FCC
Dimension 94.55mm(L) x 70.45mm(W) x 33.63mm(H)